90dB sensitivity, power rating 60 watts RMS / 120 watts peak, frequency range 40-20k Hz
Perfectly placed into any ceiling or wall. Fits round speaker hole size of 9.625" with a mounting depth of 3.5625"
While not rated for outdoor use specifically, you can place the Sky Speakers into an outdoor overhang or covered patio as long as long as they are not exposed to water directly. The main thing to avoid is placing them in a location where moisture could accumulate on them overtime.
Typically you'll connect 2 speakers per zone, so 12 speakers on the 6-zone units and 16 speakers on the 8-zone unit. However, if you have a large space that requires 4 speakers on a zone either of the Juke amplifiers can accommodate that with the Juke+ best suited to handle that given it's higher wattage output.
Ideally you'll have a positive (+) and negative (-) connection for each speaker arrive at the central location where it will connect to the amplifier. This can be done by running an individual 2 conductor wire from each speaker or running a 4 conductor wire from a pair of speakers, with the latter option requiring less wire.
These sky speakers are high-performance in-ceiling speakers that offer a rich and full sound. The 8" woofer offers noticeably more bass and low-end frequency from songs in comparison to the smaller 6.5" or 4" in-ceiling speakers. Also with a sensitivity rating at 90db, these speakers are highly efficient resulting in the clear and high output an amplifier paired with it.
Rather than following a typical process of using a drill or screwer to mount the speakers into place, the Sky Speakers offer a unique quick to connect installation mechanism that can be done with the tool in the box. After inserting the speakers into the cutout (9.625"), you then insert the tool into the 4 rivets around the perimeter of the speaker frame which fans out of the wings that hold it into the drywall / sheetrock.
.svg){kind=small}
.png)
Power Output: 100 watts per channel at peak (200 watts per zone)
Wireless Inputs: Airplay 2, Spotify Connect, Bluetooth 5, DLNA
Wired Inputs: 1 RCA, 1 Optical, 2 USB ports (Requires this USB to RCA adapter)
Wired Outputs: 1 RCA 1 Optical
Speaker Impedance: 8 ohms to 2 ohms
Voltage input range: 90 to 264 VAC, 127 to 370 VDC
7lbs
17.13" wide by 8.38" deep by 1.75" high
Mounts into standard 19" equipment rack in 1U format
Amplifier Power Output: 40 watts peak per channel (80 watts per zone)
Wireless Inputs: Airplay 2, Spotify Connect, Bluetooth, DLNA
Wired Inputs: 2 USB ports (Requires this USB to RCA adapter)
Speaker Impedance: 8 ohms to 2 ohms
Voltage input range: 90 to 264 VAC, 127 to 370 VDC
Dimensions: 15” wide by 8” deep by 3” tall
Rack Mountable: Yes
Weight: 6lbs
With 12 speaker channels on the amplifier, you can connect 12 speakers across 6 zones very seamlessly. Given the high wattage on this amplifier, you can also effectively power 4 speakers per zone without any issue if need be as long as the speakers are rated at 4 ohms or higher. Need more than 6 zones? You can combine multiple Jukes together on the network and have all the zones appear in the same app.
No, there are not any recurring fees assocaited with the Juke+. We do have the ability to push over the air software updates to all our amplifiers though and do so with some regularity to bring new and additional features to enhance the user experience at no additional cost.
The Juke+ offers nearly twice the wattage that the other Juke model does, allowing it to power larger and/or outdoor speakers more efficiently and with noticeable more output. Additionally, the Juke+ offers the ability to do audio equalization for each zone directly in the app and also comes with an antenna for boosted Bluetooth range and also Wi-Fi connectivity when connecting to the network wirelessly.
Yes, the Juke Audio app is available in both the Google Play and Apple App store and allows for full control of the system such as volume control, zone selection, and more. In terms of streaming capabilities to the device, Apple users can stream any app/content they want to any of the speaker zones via Airplay 2. Android users can do this as well via a third party app called AirMusic or stream directly from Spotify or use Bluetooth to send their audio from their app of choice.
Using the RCA output on the device, you can run a wired connection into the RCA input on a subwoofer. This will then serve as one of the zones in the app and give you the ability to tie that subwoofer in with any of your connected speakers easily and efficiently.
Apple users can stream any app / content to Juke via Airplay 2 over the Wi-Fi network. Additionally, Spotify users of any device type can send audio from the app to Juke via Spotify Connect which is also done over the Wi-Fi network. You can also send audio to Juke via Bluetooth as long as you're in range of the Juke. Want additional options? Connect a wired audio source (streamer, vinyl player, etc.) via Juke's USB ports.
You can send audio to Juke wirelessly either from an AppleTV via Airplay without any range limitations or from a Smart TV via Bluetooth. If you want to run a hardwired connection from the output of the TV, you can do so by running an optical or HDMI connection from the output of the TV back to the Juke and then converting it with these adapters (USB to RCA, RCA to HDMI, RCA to Optical) to connect into Juke's USB port.
Each of Juke's zones have separate amplification components built inside that allow it to efficiently power speaker sets across multiple rooms from a single amplifier. Juke will provide strong output into in-wall or in-ceiling speaker with a wattage rating up to about 150 watts. If you have a preference for louder music and/or have larger speakers or outdoor speakers in a larger space, we do recommend utilizing the Juke+ model for it's additional wattage output.
While Juke is used to power stereo output across the entirety of a home, some users may elect to use a separate surround sound receiver in their main TV/media area. In this scenario, you can connect the zone 2 output of that surround sound receiver into the Juke as an input via this USB to RCA adapter. If you'd like to have the surround sound room be an output of the Juke, please see our support tab for details.
While there is not a direct integration between Juke and Sonos, you can connect a Sonos port (or other streamer) into the Juke's USB port via this USB to RCA adapter. Doing so will allow you to use the Sonos app to stream to Juke and other Sonos speakers in the house together. Important to note that wireless streaming to the Juke and it's connected speakers it already supported natively without Sonos though, and you can use Apple HomePods as "wireless" speakers if you want to add speakers in a room where there isn't wired speakers in place.
Drop your email below and we’ll reach out to begin the process
© 2023 JukeAudio. All rights reserved.
Product Reviews